储液器

用途Usage:
空调压缩机用铜储液器及车用铁储液器是空调系统中起制冷工质的储存、液汽分离、防止压缩机产生液击、
过滤杂质及回油等作用的部件。
Copper accumulator is one of the important components air-conditioner system.lt functions to store refrigerant,liquid-gas
separating,contamination,and oil-circling.lt protects the compressor by avoiding flood-shock.
说明Explanation:
应用于制冷系统时应根据系统所要求的制冷剂的不同，工作压力的不同及接口尺寸不同选择合适规格的储
液器。由于储液器进出气管与器体焊接位置较近，当储液器与压缩机及管路二次焊接时，应尽可能避免焊接火
焰加热储液器接管焊缝(可有湿布盖住接管焊缝)以防止在接管与器体焊接处产生泄漏。

When applied in refrigerating system,you should select an appropriate-spec accumulator according to the differs of refrigerant,working pressure and joint dimension shich is required in system.When outlet tuble and inlet tuble are welding respectively in compressor and air-condition workshop,you should cover the joint with wet cloth in order to protect welding joint from heat shock during the welding.

技术参数Parameter:
气密性《MPa ):在2.2MPa的压力下保持，分钟无泄漏
耐压强度(MPa ):在4.5MPa的压力下保持3分钟无泄漏及变形
最大工作压力:2.2MPa
杂质含量:<3.5mg
适用制冷剂:R22, R410A, R407c
Air-tightness(MPa):No leakage under 2.2Mpa keep for 1 min
Pressure Resistance(MPa):No leakage and distortion under 4.5Mpa keep for 3 min
Max.Working Pressure: 2.2MPa
Impurity Content: <3.5mg
Suitable refrigerant: R22,  R410A,  R407c